The 30-second quick start
In a hurry? Here is the whole routine: charge the battery, click it into the handle, pick a nozzle, aim low at the debris and pull the trigger. Work in one direction so everything ends up in one pile instead of scattered around.
The sections below explain each step in detail, plus the tips that make a real difference for leaves, cars, snow and dust.
1. Charge the battery
Before first use, charge the 20V lithium-ion battery fully with the included AC charger. A full charge from empty takes about 2–3 hours. Remove the battery pack from the blower before charging, and charge it indoors at room temperature.
For the best battery life, avoid leaving the pack on the charger for days at a time. Unplug it once it is full, and top it up before a big job rather than storing it completely empty.
2. Attach the right nozzle
The kit includes two nozzles, and each one changes how the air behaves. Picking the right one is the difference between sweeping a patio in two minutes and chasing leaves around for ten.
- Short nozzle — wide airflow for patios, driveways, decks and car panels
- Extension nozzle — focused airflow for gutters, under decks, engine bays and corners
- No nozzle — maximum air volume for clearing open areas of dry leaves
3. Click in the battery and blow
Slide the battery into the handle until it clicks. Hold the blower with a firm grip, aim the nozzle at a low angle toward the debris, and press the trigger. The JetBurst motor spins up to 21,000 RPM, so start a short distance from lightweight items and move closer as needed.
Work in one direction so debris is pushed into a single pile. Short bursts give you more control than holding the trigger constantly, and they stretch your runtime.
Technique for leaves
Dry leaves are easy; wet matted leaves are a job for a rake. Blow when leaves are dry, work with the wind instead of against it, and use sweeping side-to-side motions while walking backward away from the pile.
- Blow dry leaves for the best results
- Work with the wind, not against it
- Use sweeping side-to-side motions
- Start at the edges and herd leaves toward one collection point
Technique for drying cars
After washing, use the short nozzle to push water off panels, mirrors, grilles and wheels. Start at the roof and work down so water always flows away from finished areas. The focused air reaches the spots towels miss — around badges, door handles and mirror housings — which is where drip marks come from.
Keep the nozzle a few inches from the paint and keep it moving. See our full guide to drying a car without water spots for the complete routine.
Technique for light snow
The Bullseye Blower clears light, powdery snow from steps, walkways, porches and windshields. Use the short nozzle, keep the airflow low and flat across the surface, and clear snow before it gets walked on or driven over.
Heavy, wet or compacted snow still needs a shovel — the blower is for the fresh inch or two that falls overnight.
Technique for dust and workshops
For sawdust, workbench cleanup and garage floors, the extension nozzle gives you a focused stream that lifts dust out of corners and from under benches. For electronics like PC cases and keyboards, use short bursts from a greater distance and hold fans in place so they do not overspin.
Battery care and storage
Lithium-ion batteries last longest when they are treated gently. Avoid running the pack completely flat every time, and do not store it fully empty for weeks — a partial charge is the healthiest storage state.
Keep the battery out of hot cars in summer and bring it indoors in winter. If the pack has been sitting in freezing temperatures, let it warm up to room temperature before charging.
Using the blower in cold weather
Cold reduces every lithium-ion battery's runtime, so expect shorter sessions on freezing days. Keep the battery warm indoors until you are ready to work, and pop it back inside between jobs.
For winter car clearing, the extension nozzle is ideal for pulling powdery snow out of mirror housings, wiper wells and door seams where it melts and refreezes.
Troubleshooting
- Won't start — check the battery is clicked fully into the handle and charged
- Weak airflow — check the nozzle is seated properly and the air intake is clear of dust or hair
- Short runtime — a cold or aging battery delivers less; warm it up or charge it fully
- Stops mid-job — the battery is likely empty; recharge for 2–3 hours
Safety
- Wear eye protection when blowing dust or debris
- Never point the blower at people or pets
- Keep loose clothing and hair away from the air intake
- Store the battery in a cool, dry place away from children
Frequently asked questions
How long does the battery take to charge?
A full charge from empty takes about 2–3 hours with the included charger. Charge the pack indoors at room temperature.
How long does the Bullseye Blower run per charge?
About 20–30 minutes depending on how you use the trigger. Short bursts extend runtime significantly.
Can I use the blower while it is charging?
No. The battery must be removed from the blower to charge, so the blower cannot run while its battery is on the charger.
Can I use it in the rain or on wet surfaces?
You can blow water off a freshly washed car, but the blower itself is not waterproof. Do not use it in the rain or submerge any part of it.
How should I store the battery?
Store the battery in a cool, dry place, partly charged rather than fully empty. Bring it indoors during freezing weather.
What if my Bullseye Blower stops working?
Check the troubleshooting section below first. If that does not solve it, every order is covered by a 90-day money-back guarantee — contact us and we will make it right.
Can I leave the battery on the charger overnight?
Occasionally is fine, but for the best long-term battery health, unplug the pack once it is full rather than leaving it on the charger for days.
Is the Bullseye Blower loud?
Like any high-RPM jet blower, full power is loud. Short bursts at a distance are quieter and often all you need for dusting and detail work.